欢迎访问青岛金辉户外用品有限公司官方网站!

全国服务热线

15066272028

z
您现在所在的位置 :首页 - 新闻中心 > 行业资讯 >

行业资讯

INFORMATION

热门产品

全国统一咨询热线

15066272028

青岛金辉户外用品有限公司

联系电话:15066272028

公司地址:山东省青岛市城阳区前海西社区居委会西100米

行业资讯

电动遮阳棚的安装方式有哪些?

来源:http://www.qdjhpc.com/ 日期:2022-04-16 发布人:admin
一、曲臂式遮阳棚的测量:
1、 Measurement of curved arm sunshade:
遮阳棚宽度(以下简称篷宽)及三种类型阳台测量的确定
Determination of awning width (hereinafter referred to as awning width) and measurement of three types of balconies
1、凹式阳台
1. Concave balcony
首先,用米尺测量现场阳台的极限宽度(此尺寸为遮阳棚能安装的理论极限值)。 篷宽为以上极限尺寸再减去50mm(此尺寸为遮阳棚能安装的实际极限值)。
First, measure the limit width of the balcony on site with a meter ruler (this dimension is the theoretical limit value that the sunshade can be installed). The canopy width is the above limit dimension minus 50mm (this dimension is the actual limit value that the sunshade can be installed).
2、半凹式阳台
2. Semi concave balcony
首先,用米尺测量现场阳台的极限宽度。
First, measure the limit width of the balcony with a meter ruler.
篷宽为以上尺寸再减去50mm,此尺寸是从遮阳棚安装的对称角度考虑。实际尺寸可按客户的要求适当加长,但加长幅度**按阳台的宽度及安装脚位置另作计算。
The awning width is the above dimension minus 50mm, which is considered from the perspective of symmetry of sunshade installation. The actual size can be appropriately extended according to the customer's requirements, but the extension range * * is calculated separately according to the balcony width and installation foot position.
3、开放式阳台
3. Open balcony
首先,用米尺测量现场阳台的极限宽度。 蓬宽为以上测量尺寸。实际尺寸可按客户的要求两端适当加长,但加长幅度**按阳台的宽度及安装脚位置另作计算。
First, measure the limit width of the balcony with a meter ruler. The canopy width is measured above. The actual size can be appropriately extended at both ends according to the customer's requirements, but the extension range * * shall be calculated separately according to the width of the balcony and the position of the installation foot.
日照推拉式雨蓬
二、天顶式遮阳棚的测量:
2、 Measurement of canopy type sunshade:
天顶式遮阳棚一般安装在户外阳光房上面,根据阳光房的实际尺寸及客户要求而定。 根据阳光房的房顶而倾斜。如果阳光房为平顶,可与客户协商适当给出斜度。
The ceiling sunshade is generally installed on the outdoor sunshine room, which is determined according to the actual size of the sunshine room and customer requirements. According to the roof of the sunshine room. If the sunshine room is flat roof, the slope can be given appropriately through negotiation with the customer.
三、窗式遮阳棚的测量:
3、 Measurement of window sunshade:
窗式遮阳棚安装在窗子的外面,分为框内安装与框外安装; 实际尺寸:根据现场遮阳棚能安装的实际极限值及客户要求而定。
The window sunshade is installed outside the window, which is divided into in frame installation and out of frame installation; Actual size: determined according to the actual limit value that the sunshade can be installed on site and customer requirements.
四、确定操作方式及方位: 操作方式:手柄操作和马达操作;
4、 Determine the operation mode and orientation: operation mode: handle operation and motor operation;
操作方位:左边操作、右边操作及室内操作;
Operation orientation: left operation, right operation and indoor operation;
注意:操作方位的确认——人始终站在遮阳棚的对面为基准。
Note: confirmation of operation orientation - people always stand opposite the sunshade as the benchmark.
  • 上一条:膜结构遮阳棚整体设计需要注意什么?
  • 下一条:遮阳篷的设计对于哪些内容有要求?