There are more than one ways to install the electric sunshade. On the contrary, there are many ways to install it. Here is a detailed introduction.
1、 Measurement of curved arm sunshade:
Determination of awning width (hereinafter referred to as awning width) and measurement of three types of balconies
1. Concave balcony
First, measure the limit width of the balcony on site with a meter ruler (this dimension is the theoretical limit value that the sunshade can be installed). The canopy width is the above limit dimension minus 50mm (this dimension is the actual limit value that the sunshade can be installed).
2. Semi concave balcony
First, measure the limit width of the balcony with a meter ruler.
The awning width is the above dimension minus 50mm, which is considered from the symmetrical angle of sunshade installation. The actual size can be appropriately lengthened according to the customer's requirements, but the lengthening range * * shall be calculated separately according to the balcony width and mounting foot position.
3. Open balcony
First, measure the limit width of the balcony with a meter ruler. The canopy width is measured as above. The actual size can be appropriately lengthened at both ends according to the customer's requirements, but the lengthening range * * shall be calculated separately according to the balcony width and mounting foot position.
2、 Measurement of ceiling sunshade:
The ceiling type sunshade is generally installed on the outdoor sunshine room, which is determined according to the actual size of the sunshine room and customer requirements. According to the roof of the sunlight room. If the sunlight room is flat roof, the slope can be given appropriately through consultation with the customer.
3、 Measurement of window shade:
The window type sunshade is installed outside the window, which is divided into the installation inside the frame and the installation outside the frame; Actual size: it shall be determined according to the actual limit value that the sunshade can be installed on site and the customer's requirements.
4、 Determine the operation mode and orientation: operation mode: handle operation and motor operation;
Operation direction: left operation, right operation and indoor operation;
Note: confirmation of operation orientation - people always stand on the opposite side of the sunshade as the benchmark.
The above is the Weihai electric sunshade http://www.qdjhpc.com/ I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service